TorqueMaster Conversion to Standard Spring Kit for 16x7 Wayne Dalton Garage Door

Description

This TorqueMaster Kit is for an 16x7 Wayne Dalton
Models are: 8000, 8100, 9100, 9600
(Model selected above)
This kit is to convert your broken Torque Master spring system to an industry standard torsion system.
This kit includes everything you will need except for the tube, also referred to as the shaft
*See notes below for more details*
Included are the following items:
(1) Standard 15,000 cycle spring. This spring is calculated for this door
(1) Pair of residential end bearing plates
(1) Residential center bearing spring mount
(1) Pair of standard residential drums
(1) Pair of standard residential cables
(1) Hardware bag (Includes all hardware needed for conversion)
****Does not include tube shaft****
If you are not sure what model of door you have, we can help. The Wayne Dalton 8000 and 8100 series has a 2” frame and exposed metal stiles (where the hinges mount). The model 8000 garage door is a non insulated single layer style door.  It has a 2" thick frame and has exposed metal stiles (where the hinges mount). You will also be able to see the outside door skin from the inside. Wayne Dalton model 8100 garage door is a vinyl backed insulated style door it has inserted panel insulation.  You will see a white backed insulation panel. The 9100 and 9600 series is a 1”-1 ½” thick door with integrated horizontal braces. The 9100 model will have a hard cardboard like backer on the inside. The 9600 will be the same metal on the inside and outside.  Also feel free to send us a picture of the inside of the door and we can let you know as well.
We are a full service garage door company located in Danville, IN and have any and all parts you may need.  If you can't find the parts you are looking for please send us a message and we will make a listing for you.
Currently kit does not include instructions because there are simple too many variables in a conversion. But once the Torque Master system is removed this kit will install like any standard torsion spring kit.
*We don't include the shaft since it would be cost prohibitive to ship.  Tube needed will need to be 1' longer than the door is wide. Example a 9' wide door will need a 10' tube/shaft.  Tube is standard 1" outside diameter steel tube, very thin wall such as .060", .083" or .090". This tube should cost less than .00 at any local metal supply or a local door company.*