SWAG Machined Tubing Bender Air/Hydraulic Ram Mount For JD'2, JMR, ProTools, WWF

Description

Tube Bender Air/Hydraulic Ram Mount
Tired of cranking the handle on your tubing bender? Are you using a cheater bar slid over the factory handle to gain mechanical leverage,
while trying to read the degree wheel that is
~ 8 feet away? This kit is designed out of pure necessity and built to be the best kit out on the market.
Designed to fit the
JD-2 Model 3, JD-2 Model 32, Pro Tools 105 & 105HD,
JMR.
Woodward Fab WFB2, & Eastwood 21115
manual tubing benders.
SWAG off road has honed it focus and tube bending expertise over the past few months and redesigned the air/hydraulic ram mount to include the following feature upgrades.
The ram attachment clamp is now holding the ram in line with the bending axis, this results in less wear and tear on the bending ram and increased bending capacity.
100 pound elastic return spring and machined pressure release knob is now included with every kit.
Increased stroke length = increased bending degrees per cycle.
No welding required, 100% bolt on kit.
100% designed, machined and manufactured with all US made components and materials.
Sleek aesthetic and clean lines is what separates this kit from everything else on the market, designed with a high level of attention to detail and superior fit and finish.
This kit allows you freedom to take your tube bender with you. Since the hydraulics are now pushing directly against the arms of the bender you are free un-bolt your bender from your concrete floor and mount it on wheels thus saving you valuable floor space.
Please note
:
The Swag infinite 8 tube bender mounting plate is not compatible with the machined air/hydro ram mount.
This kit includes a new mounting plate to mount your bender. This bracket is laser cut out of 3/8" steel plate and is compatible with every tube bender that fits our machined air/hydraulic ram mount kit.
Please note that this kit is 100% complete, however it does not come painted.  Tube bender as well as the 8 ton ram is not included. The
8 Ton Air/Hydraulic ram
must have an
outside diameter of
80mm
.  There are dozens of 8 ton rams that are sold on Ebay & Amazon, however a majority of them have an outside diameter of 84MM
with will
not
work for this application.
The 80mm OD ram we recommend is
manufactured by Harbor Freight PN 56215 which can be purchased at your local Harbor Freight store
for ~.00, don't forget their 20% off coupon.
Click here to watch the JMR bender bend a piece of 1.75" .120 wall DOM tubing sleeved with 1.25" .250" wall DOM tubing
.
.......A fair warning, this bending attachment will exceed the bending capacity of your bender, common sense is advised as you must stay with in the bending capacities of your machine.
Imagine how much easier your job is going if your not having to manually retract your tube bender every time you need to re-pin your die set. The 100 pound of resistances offer by this return spring is backwards compatible with our Air/Hydro tube bender ram mount. No tools required for installation just hook it up to your bender and the back side of your 8 ton ram and your done.
The springs are made of rubber tubing
that's
encapsulated in a polypropylene fabric
sleeve for excellent wear resistance.
This item ships out using USPS priority mail or UPS, please provide a valid shipping address that works for both shipping carriers.
website linking
Click Here for a YouTube Demo Video and Instructions
Additional details can be found on our website: swagoffroad.com